Tilta Nucleus-M Wireless Lens Control System Partial Kit I
- Tilta Nucleus-M FIZ Hand Unit
- Tilta Nucleus-M FIZ Lens Control Motor
- Tilta DSLR Lens Follow Focus Adapter
- Tilta D-Tap to 7-Pin Motor Power Cable
- 2 x Nucleus-M Follow Focus Marking Disks
- Lanyard for Nucleus-M FIZ Hand Unit
- Tilta Nucleus-M Battery Charger
The Tilta Nucleus-M Wireless Lens Control System Partial Kit I contains the essential elements for pulling focus wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, one Nucleus-M motor, one removable lens belt, a motor power cable, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger. The system enables pulling focus, iris, or zoom on your lens, and if you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.
This partial kit is a single-axis system, but the hand unit will allow you to control additional motors (not included) so you can control more than one lens ring. The system can wirelessly pull focus from up to 1000′ away, and batteries can power the hand unit for approximately 10 hours on a single charge (batteries not included). The lanyard attaches to the hand control unit, allowing you to wear it around your neck.
IN BOX
-
- Limited 2-Year Mechanical Warranty
- Limited 1-Year Electrical Warranty
-
- 19mm Rod Adapter
- 19mm to 15mm Bushing
- Limited 2-Year Mechanical Warranty
- Limited 1-Year Electrical Warranty
-
- Limited 2-Year Manufacturer Warranty
-
- Limited 2-Year Warranty on Mechanical Parts
- Limited 1-Year Warranty on Electrical Parts
-
- Limited 2-Year Manufacturer Warranty
-
- Limited 2-Year Mechanical Warranty
-
- AC Power Cable
- Limited 2-Year Mechanical Warranty
- Limited 1-Year Electrical Warranty
Tilta Nucleus-M FIZ Hand Unit Specs
| Operating Frequency | 2.4 GHz |
| Maximum Transmission Distance | 492 to 984' / 150 to 300 m |
| Transmission Channels | 15 |
| Emission Power | 30 to 100 MW |
| Current | 0.15 A |
| Voltage | 7.2 7.2-14.8 V, external |
| Battery Type | 18650 |
| Operating Temperature Range | -4 to 122°F / -20 to 50°C |
| Material of Construction | Aluminum alloy, stainless steel, ABS plastic Rubber, rosewood |
| Dimensions | 5.6 x 3.6 x 2.8" / 142.0 x 90.5 x 70 mm |
| Weight | 15 oz / 430 g |
| Package Weight | 1.05 lb |
| Box Dimensions (LxWxH) | 8 x 6.1 x 4.7" |
Tilta Nucleus-M FIZ Lens Control Motor Specs
| Gear Mod | 0.8 |
| Gear Pitch | 32 |
| Number of Gear Teeth | 35 |
| Face Width | 0.4" / 10 mm |
| Operating Frequency | 2.4 GHz |
| Maximum Range | 1640' / 500 m (unobstructed) |
| Emission Power | 30-100 MW |
| Current | Quiescent: 0.10 A, 14.8 V Conventional: 0.5 A, 14.8 V |
| Voltage | 7.2-24 V |
| Rod Compatibility | 19, 15 mm |
| Noise | 15 dB |
| Operating Temperature Range | -4 to 122°F / -20 to 50°C |
| Material of Construction | Aluminum alloy, stainless steel, ABS plastic |
| Dimensions | 4.50 x 3.25 x 1.38" / 11.43 x 8.26 x 3.49 cm |
| Weight | 6.7 oz / 190 g (motor only) 7.9 oz / 225 g (with 15mm rod adapter) 7.8 oz / 221 g (with 19mm rod adapter) |
| Package Weight | 0.495 lb |
| Box Dimensions (LxWxH) | 6.45 x 4.65 x 1.4" |
Tilta DSLR Lens Follow Focus Adapter Specs
| Material of Construction | Silicone and plastic |
| Compatibility | Tilta Nucleus-M, Nucleus-Nano Most DSLR lenses |
| Dimensions | Not supplied by manufacturer |
| Weight | Not supplied by manufacturer |
| Package Weight | 0.05 lb |
| Box Dimensions (LxWxH) | 3.9 x 3.75 x 0.5" |
Tilta Nucleus-M D-Tap To 7-Pin Motor Power Cable Specs
| Connectors | D-Tap, 7-pin LEMO-type |
| Length | 23" / 58.4 cm |
| Weight | 1.1 oz / 32 g |
| Package Weight | 0.13 lb |
| Box Dimensions (LxWxH) | 6.25 x 5.75 x 1.15" |
Tilta Nucleus-M Follow Focus Marking Disk Specs
| Material of Construction | ABS plastic |
| Dimensions and Weight | Not specified by manufacturer |
| Package Weight | 0.035 lb |
| Box Dimensions (LxWxH) | 2.75 x 2.75 x 0.5" |
Tilta Lanyard For Nucleus-M FIZ Hand Unit Specs
| Dimensions | Not specified by manufacturer |
| Package Weight | 0.09 lb |
| Box Dimensions (LxWxH) | 4.75 x 3.05 x 1.25" |
Tilta Nucleus-M Battery Charger Specs
| Power Input | 100-240 VAC, 50/60 Hz, 0.15 A 5 VDC, 2 A |
| Power Output | 4.2 VDC, 650 mAh |
| Material of Construction | Plastic |
| Package Weight | 0.6 lb |
| Box Dimensions (LxWxH) | 7.5 x 5.8 x 1.7" |
- Product Code: WLC-T03-K1
- Availability: IN STOCK
